LOCOSYS Technology Inc.

LC2303x-Vx

LC2303x-Vx series products are high-performance dual-band GNSS receivers (also known as GNSS mouse) that are capable of tracking all global civil navigation systems (GPS, GLONASS, BDS, GALILEO, QZSS and IRNSS). The GNSS mouse will acquire both L1 and L5 signals at a time while providing the better position accuracy. It can provide user with fast Time-To-First-Fix, superior sensitivity and low power consumption. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications.

LU2303x-35AD

LU2303x-35AD series products are high-performance dual-band GNSS UDR (Untethered Dead Reckoning) receivers (also known as GNSS mouse) that are capable of tracking all global civil navigation systems (GPS, GLONASS, BDS, GALILEO, QZSS). The GNSS mouse will acquire both L1 and L5 signals at a time while providing the better position accuracy. It can provide user with fast Time-To-First-Fix, superior sensitivity and low power consumption. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications.

MG-1612AD-DR

LOCOSYS MG-1612AD-DR is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3 axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, MG-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

SO-1612-DR

MC-1612-DG

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand. ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.

MC-1612-DB

LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand. ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.

ST-1612i-DBX

The LOCOSYS ST-1612i-DBX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612i-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. ST-1612i-DBX modules use GNSS chips qualified according to AEC‑Q100 and are manufactured in ISO/TS 16949 certified sites.ST-1612i-DBX modules further eases installation with automatic configuration of wheel tick input or speed, and compensation for in-vehicle antennas.

ST-1612i-DGX

The LOCOSYS ST-1612i-DGX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612i-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. ST-1612i-DGX modules use GNSS chips qualified according to AEC‑Q100 and are manufactured in ISO/TS 16949 certified sites. ST-1612i-DGX modules further eases installation with automatic configuration of wheel tick input or speed, and compensation for in-vehicle antennas.

ST-1612A-DBX

The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A-DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

ST-1612A-DGX

The LOCOSYS ST-1612A-DGX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612A-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A-DGX automotive grade module adheres to automotive industry standard quality specifications and production flow. ST-1612x-DGX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

ST-1612r-DGX

LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

ST-1612r-DBX

LOCOSYS ST-1612r-DBx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, BEIDOU, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DBx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

G310

The LOCOSYS G310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DGU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS G310 can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. And through the BLE module, the LOCOSYS G310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of G310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS G310 can be linked with Google map for real-time navigation functions.

G310-U

LOCOSYS G310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DG GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 5.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, G310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.

B310

The LOCOSYS B310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DBU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS B310 can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU, GALILEO and QZSS. And through the BLE module, the LOCOSYS B310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of B310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS B310 can be linked with Google map for real-time navigation functions.

B310-U

LOCOSYS B310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DB GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 4.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, B310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.

ST-1612i-GT

LOCOSYS ST-1612i-GT modules can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. ST-1612i-GT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode. Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.

ST-1612i-BT

LOCOSYS ST-1612i-BT modules can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU/GLONASS, GALILEO and QZSS. ST-1612i-BT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode. Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.

RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

RTK-1612

The RTK-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

RTK-1612AD-DR

LOCOSYS RTK-1612AD-DR uses an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS, providing RTK high precision and sensor fusion solution in one. It not only supports GPS, GLONASS, GALILEO, BEIDOU, and QZSS but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide an untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, RTK-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

BKR-1612

The BKR-1612 is a receiving module that supports Dual-Band & Multi-Mode. It has built-in highly integrated GNSS receiver chip, supports multi band and multi system cm4f (main frequency 350Mhz, 22nm Technology) chip of Third-generation BEIDOU Navigation Satellite System (BDS-3). Besides, it is capable of tracking all global civil navigation systems (GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS and SBAS) in all bands. BKR-1612 module is based on the state of art BDS-3 architecture, integrating multi-band and multi-system GNSS RF and baseband. This newly designed architecture makes this single chip achieve sub-meter level positioning accuracy without correction data from ground-based augmentation station and higher sensitivity, greater for improved jam resistance and multipath, provide a highly robust service in complicated environment. BKR-1612 module contains positioning engine inside, featuring high sensitivity, low power consumption, and fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high-performance signal parameter searching engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed.

BKR3-1612

The BKR3-1612 GNSS module, developed by LOCOSYS Technology Inc., is engineered for applications requiring high-precision positioning and exceptional reliability. Built upon an advanced GNSS SoC architecture and incorporating the latest BDS-3 (BeiDou Navigation Satellite System) framework, the module supports multi-band and multi-constellation reception capabilities. It can concurrently track all major global satellite navigation systems, including GPS, GLONASS, Galileo, BEIDOU, QZSS, IRNSS, and SBAS, while offering full support for L1, L2, and L5 triple-band signal reception with centimeter-level RTK positioning accuracy. At the core of the module is the Beken chip, featuring a 32-bit DSP processor built on 22nm process technology and capable of operating at up to 350MHz. The chip supports up to 200 tracking channels and integrates a dedicated high-performance search engine. It delivers excellent sensitivity across cold start, hot start, and reacquisition modes (from -148dBm to -165dBm), ensuring stable and reliable positioning performance even in challenging signal environments such as dense urban areas or under canopy. The Beken also supports AGPS, RTCM3.X, and offers a maximum update rate of 20Hz, enhancing system responsiveness in dynamic applications.

SOR-1612

LOCOSYS SOR-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. The module supports concurrent reception of GPS, BeiDou, GALILEO and QZSS to improve the availability and reliability of RTK solution even in the harsh environment. The SOR-1612 module contains LOCOSYS dual-band RTK technologies that enables precise navigation and automation of moving machinery in industrial and consumer-grade products. It featuring high sensitivity, low power consumption, and fast TTFF in a compact surface-mounted form factor of 16.0 x 12.2 x 2.4 mm.