RTK-1612AD-DR

LOCOSYS RTK-1612AD-DR uses an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS, providing RTK high precision and sensor fusion solution in one. It not only supports GPS, GLONASS, GALILEO, BEIDOU, and QZSS but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide an untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, RTK-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

RTK-1612AB-DR

SYR-1612

LS23231

LS23231 is a dual-frequency GNSS RTK receiver designed for Pixhawk2-based drone. The receiver is capable of concurrently tracking all global civil navigation systems, including GPS, GLONASS, GALILEO, BEIDOU and QZSS. It acquires both L1 and L5 signals at a time while providing the centimeter-level RTK positioning accuracy. The built-in lightweight helical antenna not only enhances RTK positioning stability, but also increases the flight time of the drone. The fast Time-To-First-Fix, RTK convergence, superior sensitivity, low power consumption and water proof make it a better choice for Pixhawk2-based drone.

LS23236

LS23236 is a dual-frequency multi-constellation GNSS receiver providing RTK high precision and sensor fusion solution. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning.No requirement of installation orientation and automatic alignment function make it easy to use. With these features, LS23236 can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation. The fast Time-To-First-Fix, RTK convergence, superior sensitivity, low power consumption and water proof make it a better choice for car navigation.

RTK-4671-MH

The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.

RTK-4671-MHDR

LOCOSYS RTK-4671-MHDR is a high-precision RTK solution targeting for the smart driving and lane-level navigation markets. The latest designed LOCO II engine architecture is optimized to offer a seamless experience in dense urban canyons. RTK-4671-MHDR takes the shortest time to fix position and continues to work where GNSS signals are poor or not available.

RTK-4671-MHPD

LOCOSYS RTK-4671-MHPD is a dual-frequency, dual-antenna receiver targeting for precision agriculture, drones, and slow-moving vehicles. This receiver provides fast precise heading and RTK position. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible interfaces, smart hardware design and popular log/command formats. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MHPD meets the requirement of most location-based applications.

RTK-4057-MHPD

LOCOSYS RTK-4057-MHPD is a L1+L5 Dual-Frequency Position with Heading RTK Board, which targeting for precision autonomous guided vehicle, smart agriculture, unmanned aerial vehicle, and any other unmanned system to integrate in.This receiver board provides fast precise heading and RTK position. It supports global multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment.Besides, it features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces, smart hardware design and output standard NMEA formats. Versatile, compact size, complete driver support, low power and high update rate.LOCOSYS RTK-4057-MHPD meets Windows, Linux, Raspberry Pi and Nvidia developer requirements or system integrator need, and helps you quickly realize unmanned application positioning function.

RTK-DUAL

RTK-DUAL series is a dual-frequency multi-constellation RTK module that designed for applications requiring accurate dual-antenna GNSS-based heading and RTK centimeter level positioning accuracy. The dual-antenna GNSS-based heading is not subject to magnetic interference. Unlike a standard dual-frequency multi-constellation RTK Module that can only estimate heading based on the movement, RTK-DUAL provides an accurate heading even while the vehicle is stationary. It is capable of concurrently tracking all global civil navigation systems, including GPS, GLONASS, GALILEO, BEIDOU and QZSS. It acquires both L1 and L5 signals at a time while providing heading between dual antennas and RTK position. RTK-DUAL adopts 12nm process and integrates efficient power management architecture to become one of the leading groups with the lightest weight and lowest power consumption on the market. Paired with our dual-frequency low power helical antennas, it can extend the usage time of battery powered drones, robotic lawn mowers, automated logistics vehicles, etc.

RTK for Android system

LOCOSYS RTK-15D product is L1 + L5 Dual-frequency and multi-constellation RTK positioning solution which provides 1cm high precision positioning accuracy. The positioning accuracy specification is "cm level" which is directly connected to the USB and allows every Android device to be immediately upgraded and quickly implement to (RTK) high-precision positioning accuracy. The receiver support GPS, GLONASS, BeiDou, GALILEO, QZSS, SBAS and other global multi-constellations, even in harsh environments, it can improve the continuity and reliability of positioning.RTK-15D product via Type-C cable easy with any Android smart phone or tablet which targets for river channel exploration, collect waypoints, construction site mapping system, highway mapping, pipeline mapping and other geographic mapping system.Besides, LOCOSYS provide unique " Firebird_P " App SW has a user-friendly operation interface, which is convenient for users to set to "Base Station mode" or "Rover mode" by themselves. This is an extreme convenient product. It features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces can quickly equip on Android system with centimeter accurate RTK.

RTK for Android system

LOCOSYS unveiled RTK Dongle (Product name is RTK-4P) which is able to receive L1 / L2 frequency and equipped with a multi-frequency Helix antenna, The positioning accuracy specification is "cm level" which is directly connected to the Smart Phone's USB Type-C and allow the smart phone to be immediately upgraded and aimed to high-precision (RTK) applications which can be used for geographic mapping、earth-rock surveying、agricultural surveying、cadastral surveying and other purposes.

RTK-M300 ( 4G-LTE )

LOCOSYS RTK-M300, a compact, rugged and industrial grade computer with Intel Atom® x5-E3930 processor dual core 1.3GHz (boost up to 1.8GHz), Aluminum top case with sheet metal, is designed for the harsh or need noiseless Ad-hoc network environment.LOCOSYS RTK-M300 has the advanced RTK (Real-time kinematic) receiver supports global GPS/Glonass/Beidou/Galileo/QZSS satellites , L1+L5 Dual-frequency and multi-constellation RTK positioning solution. RTK-M300 adopt full frequency 4G-LTE communication board, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage. It features 10/100/1000Mbps Ethernet data and voice connectivity. With external SIM socket, it allows user to access SIM card conveniently. RTK-M300 installs Win10 (or Linux)operating system, suitable for with LOCOSYS Firebird application software,provide user-friendly graphical operation interface, whether it is used for “Base station” management or “Rover” use.Because of the fan-less compact design, certified (-30 ~ +70 degrees) high and low temperature test , and (MIL-STD-810) military standard vibration test, provide fast and easy installation. It is especially for the RTK Base Station with limited room space to locate the computer system, but without compromising with its space to scarify its features. Whether as a RTK Base station or RTK Rover, it is very fast and convenient to use and install. RTK-M300 keeps the flexibility to meet different demands for telemetric monitor or surveying applications.

RTK-M200

The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.

RTK-M100

RTK-M100 system product is dual-frequency multi-constellation RTK devices, Embedded NXP® i.MX 6 (Automotive Grade) high-end processor and provides centimeter-accurate GNSS measurements. All of them can work in base station or rover. There are two communication interfaces, including Ethernet, 4G/LTE. Through these built-in communication functions for local or could data center communication with the external host.

LH-105A2-B / LH-105AR-D / LH-1056AR-D / LH-105AR-DC

LH-105A2-B and LH-105AR-D and LH-1056AR-D and LH-105AR-DC is an active dual-frequency GNSS antenna for L1 and L5 bands of GPS/QZSS, GLONASS, GALILEO, BEIDOU and IRNSS. The antenna is light and low power consumption that is ideal for applications requiring RTK level positioning accuracy, such as self-driving vehicle, drone display, aerial photography, high precision mapping, remote sensing, traffic control and public security.

LP-105AR-C

The LOCOSYS LP-105AR-C multi-band (GPS L1/L5、GLONASS L1OF、BDS B1/B2a、Galileo E1/E5a、QZSS L1/L5、NavIC) active GNSS/RTK antenna is composed of 50*50*6mm laminated 40*40*4mm ceramic dielectric antenna. The compact design, excellent price-to-performance ratio, and versatile mounting choices provide customers with a fast, easy, and reliable multi-band antenna solution. The LP-105AR-C antenna is a perfect match to LOCOSYS RTK series solutions (for example, RTK-1010、RTK-1612、RTK-M300…), supporting L1 and L5 bands.The LP-105AR-C includes a high-performance multi-band RHCP dual-resonance, dual-feed patch antenna element, a built-in high-gain LNA with SAW pre-filtering, and a 5-meter antenna cable with an SMA connector.

LS-125-A/LS-125F-A

LS-125-A is a four-star full-frequency satellite navigation antenna. The antenna has the characteristics of high gain, miniaturization, high sensitivity, multi-system compatibility and high reliability, which can effectively meet the needs of users.

LS2603x-15R

LS26030-15R and LS26031-15R are GNSS RTK modules incorporated into PCIe Full-Mini card and PCIe Half-Mini card, respectively. They support concurrent dual-frequency reception of GPS/QZSS, GLONASS, GALILEO and BEIDOU. They adoptadvanced 12nm process and efficient power management architecture to perform low power consumption and high sensitivity. Besides, the USB interface makes these modules easy to integrate into the laptop that requires centimeter level RTK positioning.

LS2603x

LOCOSYS LS26030 and LS26031 are GPS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GPS module is using MediaTek All-in-One GPS chip, MT3339, and it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

LS2603x-2RE

LOCOSYS LS26030-2RE and LS26031-2RE are GPS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GPS module's functionality is using MediaTek lateast GPS, MT3337E, ROM chip and it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. This module supports self-generate orbit prediction, EASYTM, to achieve faster cold start and warm start. The EASYTM is no need of both network assistance and host CPU’s intervention. The prediction is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available.

LS2603x-B

LOCOSYS LS26030-B and LS26031-B are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. The GNSS module is based on MediaTek advanced new generation MT3333 GNSS chip. It can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

LS2603x-G

LOCOSYS LS26030-G and LS26031-G are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. The GNSS module is based on MediaTek advanced new generation MT3333 GNSS chip. It can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

M.2-52Q

LOCOSYS M.2-52Q is a L1 High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-52Q can easily integrate into any existing system, as well as easily implemented into new systems.LOCOSYS M.2-52Q builds in LOCOSYS High Precision MG-1612-52Q module. It has built-in highly integrated GNSS receiver chip.It can achieve 1.5m CEP (open-sky) positioning accuracy representing a 40% improvement over previous generations of devices. The superior cold-start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. Its superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments.