ST-1612i-DBX

ST-1612i-DBX

The LOCOSYS ST-1612i-DBX Dead Reckoning (DR) module is the perfect solution for automotive application.

The LOCOSYS ST-1612i-DBX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612i-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance.
ST-1612i-DBX modules use GNSS chips qualified according to AEC‑Q100 and are manufactured in ISO/TS 16949 certified sites.ST-1612i-DBX modules further eases installation with automatic configuration of wheel tick input or speed, and compensation for in-vehicle antennas.

Instant Inquiry(Mon-Fri Online: 9:00-12:00,13:00-17:00 (GMT +08))

Features

• STMicroelectronics Teseo III high sensitivity solution
• AEC-Q100 qualified for automotive grade
• Support GPS, BeiDou, GALILEO and QZSS
• Capable of SBAS (WAAS, EGNOS, MSAS)
• Fast TTFF at low signal level
• Built-in Dead Reckoning (DR) software
• Built-in MEMS sensor (3-axis Gyroscope and 3-axis Accelerometer)
• Support Odometer (wheel-tick pulse) input
• Support Forward / Reverse Direction (FWD) input
• Support sensors data feed through the UART port
• Support SAE J2945/1 On-board system requirement for V2V safety communication
• IATF 16949 quality control
• Support CAN Bus ( ISO 15765-4 )
• Small form factor 16 x 12.2 x 2.3 mm
• SMD type, RoHS compliant

Specification

• Satellite System: GPS + BeiDou, GALILEO and QZSS
• Interface: UART / CAN BUS / USB
• Input Voltage: 3.0V - 4.3V
• Power (mA): TBD
• VB (uA): TBD
• Operating Temp (°C): -40 ~ 85
• Dimension (mm): 16 x 12.2 x 2.3 mm

Applications

• Automotive Navigation.
• M2M.
• Track patrol and examine car.

Files Download

• 

  ST-1612i-DBX_Datasheet_v1.8

  ---

  Datasheet of ST-1612i-DBX DR Module

  ---

---

Related Products

• 

  ST-1612i-DBX

  ST-1612i-DBX

  ---

  The LOCOSYS ST-1612i-DBX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612i-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. ST-1612i-DBX modules use GNSS chips qualified according to AEC‑Q100 and are manufactured in ISO/TS 16949 certified sites.ST-1612i-DBX modules further eases installation with automatic configuration of wheel tick input or speed, and compensation for in-vehicle antennas.

  ---

• 

  ST-1612i-DGX

  ST-1612i-DGX

  ---

  The LOCOSYS ST-1612i-DGX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612i-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. ST-1612i-DGX modules use GNSS chips qualified according to AEC‑Q100 and are manufactured in ISO/TS 16949 certified sites. ST-1612i-DGX modules further eases installation with automatic configuration of wheel tick input or speed, and compensation for in-vehicle antennas.

  ---

• 

  ST-1612A-DBX

  ST-1612A-DBX

  ---

  The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application.The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A-DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

  ---

---