MC-1010-V3b
MC-1010-V3b
LOCOSYS MC-1010-Vxx series are high-performance dual-band GNSS positioning modules that are capable of tracking all global civil navigation systems. They adopt 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity.
LOCOSYS MC-1010-Vxx series are high-performance dual-band GNSS positioning modules that are capable of tracking all global civil navigation systems. They adopt 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. Besides, concurrent reception of L1 and L5 band signals mitigates the multipath delay and achieves sub-meter position accuracy.
The modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction (called EPOC) that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction (called EPO) that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.
MC-1010-V3x with the active antenna can comply with the sensitivity specification contained in AIS 140 standard. It is the best solution to those customers that design tracking applications in compliance with AIS 140.
FEATURES
- Support GPS, GLONASS, GALILEO, BEIDOU, QZSS and NavIC
- Capable of SBAS (WAAS, EGNOS, MSAS, GAGAN) and QZSS SLAS
- Support 135-channel GNSS
- Fast TTFF at low signal level
- Free hybrid ephemeris prediction to achieve faster cold start
- Up to 10 Hz update rate
- ±10ns high accuracy time pulse (PPS)
- Support Linux and Android OS driver
- Protocol support binary output
- IATF 16949 quality control
- Small form factor 10.1 x 9.7 x 2.2 mm
- SMD type with stamp holes; RoHS compliant
SPECIFICATION
MC-1010-V3b | |||
Satellite System | GPS + GLONASS + GALILEO + BEIDOU + QZSS + NavIC | ||
Interface | UART | ||
Input Voltage | 3.1V - 4.5V | ||
Power(mA) | 35mA | ||
VB (uA) | 44uA | ||
Operating Temp (°C) | -40 ~ 85 | ||
Dimension (mm) | 10.1 x 9.7 x 2.2 mm |
CERTIFICATIONS
- CE approval
- RoHS compliant (2015/863/EU).
- Green (Halogen-free).
- EU Radio Equipment Directive compliant 2014/53/EU.
- Manufactured and fully tested in ISO/TS 16949 certified production sites.
- Greenhouse Gas (GHG) ISO 14064-1 Certification.
APPLICATIONS
- Personal positioning and navigation
- Automotive navigation
- Autonomous Vehicle (ex: AVN/T-BOX/HUD)
- Marine navigation
- Fleet management
- Unmanned Aerial Vehicles
- Hand-Held Device
- Tracker
MC-1010-V3b EVK
Welcome to contact us to get a sample or EVK board.
- Files Download
Press Release
- GPS rollover issue
Dear valued customers/partners,
Read More
If you have any GPS rollover questions or issues related to the LOCOSYS products you're using, please reach out to your sales representative or distribution... - 2019 Electronica
2019 Electronica China was held at the Shanghai New International Expo Center on March 20-22, 2019.
Read More - ST low-end vehicle terminal solution
ST's T-BOX solution is a vehicle terminal solution designed by STMicro's automotive electronics division in order to meet the national requirement for new energy vehicle control and to meet...
Read More