Search for L1 L5 | High Precision RTK GNSS Modules & Systems Manufacturer | LOCOSYS

LOCOSYS Technology Inc. established in 2005, came from a well-known research organization of information industry, a company that provide services the scope of which spans from both hardware and software in Global Navigation Satellite System (GNSS), Wireless Communication, Embedded System to Avionics, Automotive and Consumers electronics.

Result 25 - 48 of 52
123
  • RTK-1612AD-DR
    RTK-1612AD-DR
    RTK-1612AD-DR

    LOCOSYS RTK-1612AD-DR uses an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS, providing RTK high precision and sensor fusion solution in one. It not only supports GPS, GLONASS, GALILEO, BEIDOU, and QZSS but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide an untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, RTK-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.


  • RTK-1612AB-DR
    RTK-1612AB-DR
    RTK-1612AB-DR

  • BKR-1612
    BKR-1612
    BKR-1612

    The BKR-1612 is a receiving module that supports Dual-Band & Multi-Mode. It has built-in highly integrated GNSS receiver chip, supports multi band and multi system cm4f (main frequency 350Mhz, 22nm Technology) chip of Third-generation BEIDOU Navigation Satellite System (BDS-3). Besides, it is capable of tracking all global civil navigation systems (GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS and SBAS) in all bands. BKR-1612 module is based on the state of art BDS-3 architecture, integrating multi-band and multi-system GNSS RF and baseband. This newly designed architecture makes this single chip achieve sub-meter level positioning accuracy without correction data from ground-based augmentation station and higher sensitivity, greater for improved jam resistance and multipath, provide a highly robust service in complicated environment. BKR-1612 module contains positioning engine inside, featuring high sensitivity, low power consumption, and fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high-performance signal parameter searching engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed.


  • SOR-1612
    SOR-1612
    SOR-1612

  • LS23231
    LS23231
    LS23231

    LS23231 is a dual-frequency GNSS RTK receiver designed for Pixhawk2-based drone. The receiver is capable of concurrently tracking all global civil navigation systems, including GPS, GLONASS, GALILEO, BEIDOU and QZSS. It acquires both L1 and L5 signals at a time while providing the centimeter-level RTK positioning accuracy. The built-in lightweight helical antenna not only enhances RTK positioning stability, but also increases the flight time of the drone. The fast Time-To-First-Fix, RTK convergence, superior sensitivity, low power consumption and water proof make it a better choice for Pixhawk2-based drone.


  • LS23236
    LS23236
    LS23236

    LS23236 is a dual-frequency multi-constellation GNSS receiver providing RTK high precision and sensor fusion solution. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. No requirement of installation orientation and automatic alignment function make it easy to use. With these features, LS23236 can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation. The fast Time-To-First-Fix, RTK convergence, superior sensitivity, low power consumption and water proof make it a better choice for car navigation.


  • RTK-4057-MHPD
    RTK-4057-MHPD
    RTK-4057-MHPD

    LOCOSYS RTK-4057-MHPD is a L1+L5 Dual-Frequency Position with Heading RTK Board, which targeting for precision autonomous guided vehicle, smart agriculture, unmanned aerial vehicle, and any other unmanned system to integrate in. This receiver board provides fast precise heading and RTK position. It supports global multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces, smart hardware design and output standard NMEA formats. Versatile, compact size, complete driver support, low power and high update rate. LOCOSYS RTK-4057-MHPD meets Windows, Linux, Raspberry Pi and Nvidia developer requirements or system integrator need, and helps you quickly realize unmanned application positioning function.


  • RTK-DUAL
    RTK-DUAL
    RTK-DUAL

    RTK-DUAL series is a dual-frequency multi-constellation RTK module that designed for applications requiring accurate dual-antenna GNSS-based heading and RTK centimeter level positioning accuracy. The dual-antenna GNSS-based heading is not subject to magnetic interference. Unlike a standard dual-frequency multi-constellation RTK Module that can only estimate heading based on the movement, RTK-DUAL provides an accurate heading even while the vehicle is stationary. It is capable of concurrently tracking all global civil navigation systems, including GPS, GLONASS, GALILEO, BEIDOU and QZSS. It acquires both L1 and L5 signals at a time while providing heading between dual antennas and RTK position. RTK-DUAL adopts 12nm process and integrates efficient power management architecture to become one of the leading groups with the lightest weight and lowest power consumption on the market. Paired with our dual-frequency low power helical antennas, it can extend the usage time of battery powered drones, robotic lawn mowers, automated logistics vehicles, etc.


  • RTK for Android system
    RTK for Android system
    RTK for Android system

    LOCOSYS RTK-15D product is L1 + L5 Dual-frequency and multi-constellation RTK positioning solution which provides 1cm high precision positioning accuracy. The positioning accuracy specification is "cm level" which is directly connected to the USB and allows every Android device to be immediately upgraded and quickly implement to (RTK) high-precision positioning accuracy. The receiver support GPS, GLONASS, BeiDou, GALILEO, QZSS, SBAS and other global multi-constellations, even in harsh environments, it can improve the continuity and reliability of positioning. RTK-15D product via Type-C cable easy with any Android smart phone or tablet which targets for river channel exploration, collect waypoints, construction site mapping system, highway mapping, pipeline mapping and other geographic mapping system. Besides, LOCOSYS provide unique " Firebird_P " App SW has a user-friendly operation interface, which is convenient for users to set to "Base Station mode" or "Rover mode" by themselves. This is an extreme convenient product. It features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces can quickly equip on Android system with centimeter accurate RTK.


  • RTK-M300
    RTK-M300
    RTK-M300

    LOCOSYS RTK-M300, a compact, rugged and industrial grade computer with Intel Atom® x5-E3930 processor dual core 1.3GHz (boost up to 1.8GHz), Aluminum top case with sheet metal, is designed for the harsh or need noiseless Ad-hoc network environment. LOCOSYS RTK-M300 has the advanced RTK (Real-time kinematic) receiver supports global GPS/Glonass/Beidou/Galileo/QZSS satellites , L1+L5 Dual-frequency and multi-constellation RTK positioning solution. RTK-M300 adopt full frequency 4G-LTE communication board, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage. It features 10/100/1000Mbps Ethernet data and voice connectivity. With external SIM socket, it allows user to access SIM card conveniently. RTK-M300 installs Win10 (or Linux)operating system, suitable for with LOCOSYS Firebird application software,provide user-friendly graphical operation interface, whether it is used for “Base station” management or “Rover” use. Because of the fan-less compact design, certified (-30 ~ +70 degrees) high and low temperature test , and (MIL-STD-810) military standard vibration test, provide fast and easy installation. It is especially for the RTK Base Station with limited room space to locate the computer system, but without compromising with its space to scarify its features. Whether as a RTK Base station or RTK Rover, it is very fast and convenient to use and install. RTK-M300 keeps the flexibility to meet different demands for telemetric monitor or surveying applications.


  • RTK-M200
    RTK-M200
    RTK-M200

    The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.


  • LH-1256AR-D / LH-1256AR-E / LH-1256L / LF-1256L
    LH-1256AR-D / LH-1256AR-E / LH-1256L / LF-1256L
    LH-1256AR-D / LH-1256AR-E / LH-1256L / LF-1256L

    LH-1256AR-D is an four constellations multi-band GNSS helix antenna for L1 ,L2 ,L5 and L-bands of GPS/QZSS, GLONASS, GALILEO, BEIDOU and IRNSS. This antenna's small size, light weight, and low power consumption make it ideal for applications requiring RTK-level positioning accuracy, such as autonomous vehicles, drone displays, aerial photography, high-precision mapping, remote sensing, traffic control, and public safety. The LH-1256AR-E is a compact and lightweight four-constellation multi-band GNSS helix antenna, supporting L1, L2, L5, and L-bands of GPS/QZSS, GLONASS, GALILEO, BEIDOU systems. This antenna is designed to deliver reliable and accurate GNSS reception across multiple satellite systems, making it versatile for diverse operational needs in challenging environments. LH-1256L is an active GNSS antenna for all bands of GPS/QZSS, GLONASS, GALILEO, BEIDOU and NAVIC. It also supports L band from 1525MHz to 1559MHZ. The antenna is light and low power consumption that is ideal for applications requiring RTK level positioning accuracy, such as self-driving vehicle,UAV, aerial photography, high precision mapping, remote sensing, traffic control and public security. LOCOSYS LF-1256L embedded antenna is designed for high precision positioning and offers superior satellite signal tracking, including GPS, GLONASS, GALILEO, and Beidou, as well as L-Band correction service. It supports multiple frequency bands, including L1, L2, and L5, enhancing its capability to receive more accurate and reliable signals from different constellations. The antenna is equipped with an SMA connector, allowing for easy integration with various devices and systems. Its RTK level positioning accuracy makes it ideal for applications such as surveying, mapping, hand-held device, and various UAV operations, where precision and reliability are critical. The multi-frequency support and SMA interface ensure stable connections, mitigating issues like signal interference and multipath errors, ensuring robust performance in challenging environments.


  • LH-105A2-B / LH-105AR-D  / LH-105AR-DC / LF-105A2-B
    LH-105A2-B / LH-105AR-D / LH-105AR-DC / LF-105A2-B
    LH-105A2-B / LH-105AR-D / LH-105AR-DC / LF-105A2-B

    LH-105A2-B and LH-105AR-D and LH-105AR-DC are active dual-frequency GNSS antenna for L1 and L5 bands of GPS/QZSS, GLONASS, GALILEO , BEIDOU and IRNSS. The antenna is light and low power consumption that is ideal for applications requiring RTK level positioning accuracy, such as self-driving vehicle, drone display, aerial photography, high precision mapping, remote sensing, traffic control and public security. LOCOSYS LF-105A2-B embedded antenna is designed for high precision positioning and offers superior satellite signal tracking, including GPS, GLONASS, GALILEO, and Beidou service. It supports multiple frequency bands, including L1 and L5, enhancing its capability to receive more accurate and reliable signals from different constellations. The antenna is equipped with an SMA connector, allowing for easy integration with various devices and systems. Its RTK level positioning accuracy makes it ideal for applications such as surveying, mapping, hand-held device, and various UAV operations, where precision and reliability are critical. The multi-frequency support and SMA interface ensure stable connections, mitigating issues like signal interference and multipath errors, ensuring robust performance in challenging environments.


  • LP-105AR-C
    LP-105AR-C
    LP-105AR-C

    The LOCOSYS LP-105AR-C multi-band (GPS L1/L5、GLONASS L1OF、BDS B1/B2a、Galileo E1/E5a、QZSS L1/L5、NavIC) active GNSS/RTK antenna is composed of 50*50*6mm laminated 40*40*4mm ceramic dielectric antenna. The compact design, excellent price-to-performance ratio, and versatile mounting choices provide customers with a fast, easy, and reliable multi-band antenna solution. The LP-105AR-C antenna is a perfect match to LOCOSYS RTK series solutions (for example, RTK-1010、RTK-1612、RTK-M300…), supporting L1 and L5 bands. The LP-105AR-C includes a high-performance multi-band RHCP dual-resonance, dual-feed patch antenna element, a built-in high-gain LNA with SAW pre-filtering, and a 5-meter antenna cable with an SMA connector.


  • LS2603x-35AD
    LS2603x-35AD
    LS2603x-35AD

    LS26030-35AD and LS26031-35AD series integrate GNSS fusion modules into the PCIe Full-Mini card or PCIe Half-Mini card. These GNSS DR modules can provide superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop.


  • LS2603x-52Q
    LS2603x-52Q
    LS2603x-52Q

    LS26030-52Q and LS26031-52Q are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GNSS modules can provide superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.


  • LS2603x-15R
    LS2603x-15R
    LS2603x-15R

    LS26030-15R and LS26031-15R are GNSS RTK modules incorporated into PCIe Full-Mini card and PCIe Half-Mini card, respectively. They support concurrent dual-frequency reception of GPS/QZSS, GLONASS, GALILEO and BEIDOU. They adoptadvanced 12nm process and efficient power management architecture to perform low power consumption and high sensitivity. Besides, the USB interface makes these modules easy to integrate into the laptop that requires centimeter level RTK positioning.


  • M.2-52Q
    M.2-52Q
    M.2-52Q

    LOCOSYS M.2-52Q is a L1 High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-52Q can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-52Q builds in LOCOSYS High Precision MG-1612-52Q module. It has built-in highly integrated GNSS receiver chip. It can achieve 1.5m CEP (open-sky) positioning accuracy representing a 40% improvement over previous generations of devices. The superior cold-start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. Its superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments.


  • M.2-V2b
    M.2-V2b
    M.2-V2b

    LOCOSYS M.2-V2b is a L1+L5 GNSS High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-V2b can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-V2b builds in LOCOSYS High Precision MC-1612-V2b module. It has built-in highly integrated GNSS receiver chip, it adopt 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity with fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high performance signal parameter search engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed. Besides, concurrent reception of L1 and L5 band signals mitigates the multipath delay and achieves sub-meter position accuracy.


  • M.2-15R
    M.2-15R
    M.2-15R

    LOCOSYS M.2-15R is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-15R can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-15R builds in LOCOSYS High Precision RTK-1612 module. It is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.


  • M.2-35AD
    M.2-35AD
    M.2-35AD

    LOCOSYS M.2-35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-35R can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-35AD builds in LOCOSYS High Precision MC-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.


  • M.2-R35AD
    M.2-R35AD
    M.2-R35AD

    LOCOSYS M.2-R35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-R35AD can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-R35AD builds in LOCOSYS High Precision RTK-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.


  • UB-52Q
    UB-52Q
    UB-52Q

    LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.



Result 25 - 48 of 52
123

Press Release