BKR-1612

BKR-1612

BKR-1612

The BKR-1612 is a receiving module that supports Dual-Band & Multi-Mode. It has built-in highly integrated GNSS receiver chip, supports multi band and multi system cm4f (main frequency 350Mhz, 22nm Technology) chip of Third-generation BEIDOU Navigation Satellite System (BDS-3). Besides, it is capable of tracking all global civil navigation systems (GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS and SBAS) in all bands.

BKR-1612 module is based on the state of art BDS-3 architecture, integrating multi-band and multi-system GNSS RF and baseband. This newly designed architecture makes this single chip achieve sub-meter level positioning accuracy without correction data from ground-based augmentation station and higher sensitivity, greater for improved jam resistance and multipath, provide a highly robust service in complicated environment.

BKR-1612 module contains positioning engine inside, featuring high sensitivity, low power consumption, and fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high-performance signal parameter searching engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed.

Features

• Build on high performance
• Ultra high Track sensitivity: -165dBm
• Concurrent reception of dual-band and multi-system satellite signals
• Supports GPS, GLONASS, GALILEO, BEIDOU,QZSS and IRNSS
• Support RTK ; Protocol : RTCM 3.3
• Built in LNA and SAW filter
• Supports BDS-3 signal
• Up to 10 Hz update rate
• Extremely fast TTFF at low signal level
• Multipath detection and suppression
• Works with passive and active antenna
• Low power consumption: Max 28mA@3.3V
• NMEA-0183 compliant protocol or custom protocol
• Operating voltage: 2.7V to 3.6V
• SMD type with stamp holes
• Small form factor: 16×12.2×2.4 mm
• Operating temperature -40 ~ +85ºC
• Use GNSS chip qualified according to AEC-Q100
• RoHS compliant (Lead-free)

Applications

• LBS (Location Based Service)
• PND (Portable Navigation Device)
• Vehicle navigation system
• Mobile phone

Files Download

• 

  BKR-1612_datasheet_v0.3

  ---

  Datasheet of BKR-1612

  ---

---

Related Products

• 

  RTK-M300

  RTK-M300

  ---

  LOCOSYS RTK-M300, a compact, rugged and industrial grade computer with Intel Atom® x5-E3930 processor dual core 1.3GHz (boost up to 1.8GHz), Aluminum top case with sheet metal, is designed for the harsh or need noiseless Ad-hoc network environment. LOCOSYS RTK-M300 has the advanced RTK (Real-time kinematic) receiver supports global GPS/Glonass/Beidou/Galileo/QZSS satellites , L1+L5 Dual-frequency and multi-constellation RTK positioning solution. RTK-M300 adopt full frequency 4G-LTE communication board, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage. It features 10/100/1000Mbps Ethernet data and voice connectivity. With external SIM socket, it allows user to access SIM card conveniently. RTK-M300 installs Win10 (or Linux)operating system, suitable for with LOCOSYS Firebird application software,provide user-friendly graphical operation interface, whether it is used for “Base station” management or “Rover” use. Because of the fan-less compact design, certified (-30 ~ +70 degrees) high and low temperature test , and (MIL-STD-810) military standard vibration test, provide fast and easy installation. It is especially for the RTK Base Station with limited room space to locate the computer system, but without compromising with its space to scarify its features. Whether as a RTK Base station or RTK Rover, it is very fast and convenient to use and install. RTK-M300 keeps the flexibility to meet different demands for telemetric monitor or surveying applications.

  ---

• 

  RTK-M980

  RTK-M980

  ---

  LOCOSYS RTK-M980, a compact, rugged and industrial grade computer with Intel Atom® x5-E3930 processor dual core base clock 1.3GHz (boost up to 1.8GHz), Aluminum top case with sheet metal, is designed for the harsh or need noiseless Ad-hoc network environment. LOCOSYS RTK-M980 has advanced RTK (Real-time kinematic) receiver supports global GPS/GLONASS/BeiDou/GALILEO/QZSS, L1+L2+L5 Dual-frequency and multi-constellation RTK positioning solution. RTK-M980 adopt full frequency 4G-LTE communication board, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage. It features 10/100/1000Mbps Ethernet data and voice connectivity. With external SIM socket, it allows user to access SIM card conveniently. RTK-M980 installs Win10 (or Linux) operating system, suitable for with LOCOSYS Firebird application software, provide user-friendly graphical operation interface, whether it is used for “Base station” management or “Rover” use. Because of the fan-less compact design, certified (-30 ~ +70 degrees) high and low temperature test and (MIL-STD-810) military standard vibration test, provide fast and easy installation. It is especially for the RTK Base Station with limited room space to locate the computer system, but without compromising with its space to scarify its features. Whether as a RTK Base station or RTK Rover, it is very fast and convenient to use and install. RTK-M980 keeps the flexibility to meet different demands for telemetric monitor or surveying applications.

  ---

• 

  GB-104B/WB

  GB-104B/WB

  ---

  LOCOSYS GB-104B/WB is the perfect solution for your high-precision positioning and navigation needs. Based on the multi-constellation, multi-frequency ( L1/L2/L5). A satellite positioning receiver capable of RTK (Real Time Kinematic) takes in the normal signals from the Global Navigation Satellite Systems (GNSS) along with a separate correction data stream to achieve improved positional accuracy. GB-104B/WB supports 1408 super channels and has built in an adaptive anti-jamming technology The positioning accuracy for RTK (RMS) is Horizontal : 0.8 cm + 1ppm and Vertical : 1.5 cm + 1ppm. The GB-10XX product has passed the rigorous MIL-STD 810H vibration test.

  ---

• 

  GB-304WB/WB

  GB-304WB/WB

  ---

  LOCOSYS GB-304WB/WB is the perfect solution for your high-precision positioning and navigation needs. Based on the multi-constellation, multi-frequency ( L1/L2/L5). A satellite positioning receiver capable of RTK (Real Time Kinematic) takes in the normal signals from the Global Navigation Satellite Systems (GNSS) along with a separate correction data stream to achieve improved positional accuracy. GB-304WB/WB supports 1408 super channels and has built in an adaptive anti-jamming technology The positioning accuracy for RTK (RMS) is Horizontal : 0.8 cm + 1ppm and Vertical : 1.5 cm + 1ppm.

  ---

• 

  RTK-1612AD-DR

  RTK-1612AD-DR

  ---

  LOCOSYS RTK-1612AD-DR uses an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS, providing RTK high precision and sensor fusion solution in one. It not only supports GPS, GLONASS, GALILEO, BEIDOU, and QZSS but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide an untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, RTK-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

  ---

• 

  BKR-1612

  BKR-1612

  ---

  The BKR-1612 is a receiving module that supports Dual-Band & Multi-Mode. It has built-in highly integrated GNSS receiver chip, supports multi band and multi system cm4f (main frequency 350Mhz, 22nm Technology) chip of Third-generation BEIDOU Navigation Satellite System (BDS-3). Besides, it is capable of tracking all global civil navigation systems (GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS and SBAS) in all bands. BKR-1612 module is based on the state of art BDS-3 architecture, integrating multi-band and multi-system GNSS RF and baseband. This newly designed architecture makes this single chip achieve sub-meter level positioning accuracy without correction data from ground-based augmentation station and higher sensitivity, greater for improved jam resistance and multipath, provide a highly robust service in complicated environment. BKR-1612 module contains positioning engine inside, featuring high sensitivity, low power consumption, and fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high-performance signal parameter searching engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed.

  ---

• 

  SOR-1612

  SOR-1612

  ---

  LOCOSYS SOR-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. The module supports concurrent reception of GPS, BeiDou, GALILEO and QZSS to improve the availability and reliability of RTK solution even in the harsh environment. The SOR-1612 module contains LOCOSYS dual-band RTK technologies that enables precise navigation and automation of moving machinery in industrial and consumer-grade products. It featuring high sensitivity, low power consumption, and fast TTFF in a compact surface-mounted form factor of 16.0 x 12.2 x 2.4 mm.

  ---

---