RTK board (L1+L5)

RTK-4057-MHPD / 大辰科技有限公司成立于2005年,我们提供全球导航卫星系统(GNSS),无线通信,嵌入式系统,航空电子,汽车和消费电子等硬体和软体的服务范围。

Promotion Product-MC-1612-DG

Promotion Product-MC-1612-DG

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.

更多
Promotion Product-RTK-1010

Promotion Product-RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多

大辰科技RTK board (L1+L5)简介

大辰科技有限股份公司是台湾一家拥有超过11年经验的专业RTK board (L1+L5)生产制造服务商. 我们成立于西元2006年, 在GPS / GNSS产业领域上, 大辰科技提供专业高品质的RTK board (L1+L5)制造服务, 大辰科技总是可以达成客户各种品质要求

RTK board (L1+L5)

RTK-4057-MHPD

RTK-4057-MHPD
RTK-4057-MHPD

LOCOSYS RTK-4057-MHPD is a L1+L5 Dual-Frequency Position with Heading RTK Board, which targeting for precision autonomous guided vehicle, smart agriculture, unmanned aerial vehicle, and any other unmanned system to integrate in.
 
This receiver board provides fast precise heading and RTK position. It supports global multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment.
 
Besides, it features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces, smart hardware design and output standard NMEA formats. Versatile, compact size, complete driver support, low power and high update rate.
 
LOCOSYS RTK-4057-MHPD meets Windows, Linux, Raspberry Pi and Nvidia developer requirements or system integrator need, and helps you quickly realize unmanned application positioning function.

特性

  • L1 + L5 Dual-frequency and multi-constellation heading and RTK positioning solution.
  • Support GPS, GLONASS, BeiDou, GALILEO, QZSS satellite.
  • Capable of SBAS (WAAS, EGNOS, MSAS, GAGAN).
  • Dual 135 channels GNSS with dual-antenna input.
  • Built in independent short-circuit protection for each antenna input.
  • RTK Position Accuracy 1cm CEP.
  • Heading accuracy < 0.2° RMS.
  • Support proprietary heading and elevation.
  • Support 1/5Hz Default, Up to 10Hz update rate.
  • Industrial operating temperature range -40 to +85°C.
  • Low-power consumption and compact size.
  • USB complete driver.
  • LOCOSYS IATF 16949 Taiwan certified production sites.

应用

  • Autonomous Vehicle Guidance
  • Unmanned Aerial Vehicles
  • Precision Agriculture
  • AGV Robotics
  • Structural / Land Monitoring
  • IPC equipment

                      



RTK-4057-MHPD EVK

 

                                   Front                                                                                                  

Accessories

                               Helix Antenna                                                                                           

         


                               Mounting Base                                                      


Firebird basic function

 








Firebird : RTK base & rover

Easy to achieve 1cm+1PPM CEP

 





 

资料下载

关联产品
  • RTK Board (L1+L2) - RTK-4671-MH
    RTK Board (L1+L2)
    RTK-4671-MH

    The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.


  • RTK 系统盒 - RTK-M200
    RTK 系统盒
    RTK-M200

    The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.


  • RTK-4P - RTK 4P
    RTK-4P
    RTK for Android system

    LOCOSYS unveiled RTK Dongle (Product name is RTK-4P) which is able to receive L1 / L2 frequency and equipped with a multi-frequency Helix antenna, The positioning accuracy specification is "cm level" which is directly connected to the Smart Phone's USB Type-C and allow the smart phone to be immediately upgraded and aimed to high-precision (RTK) applications which can be used for geographic mapping、earth-rock surveying、agricultural surveying、cadastral surveying and other purposes.




新闻稿