RTK board (L1+L5)

Promotion Product-MC-1612-DG

Promotion Product-MC-1612-DG

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS and SBAS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.

Promotion Product-RTK-1010

Promotion Product-RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.


大辰科技 RTK board (L1+L5)簡介

大辰科技有限股份公司是台灣一家擁有超過11年經驗的專業RTK board (L1+L5)生產製造服務商. 我們成立於西元2006年, 在GPS / GNSS產業領域上, 大辰科技提供專業高品質的RTK board (L1+L5)製造服務, 大辰科技 總是可以達成客戶各種品質要求

RTK board (L1+L5)



LOCOSYS RTK-4057-MHPD is a L1+L5 Dual-Frequency Position with Heading RTK Board, which targeting for precision autonomous guided vehicle, smart agriculture, unmanned aerial vehicle, and any other unmanned system to integrate in.

This receiver board provides fast precise heading and RTK position. It supports global multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment.

Besides, it features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces, smart hardware design and output standard NMEA formats. Versatile, compact size, complete driver support, low power and high update rate.

LOCOSYS RTK-4057-MHPD meets Windows, Linux, Raspberry Pi and Nvidia developer requirements or system integrator need, and helps you quickly realize unmanned application positioning function.


  • L1 + L5 Dual-frequency and multi-constellation heading and RTK positioning solution.
  • Support GPS, GLONASS, BeiDou, GALILEO, QZSS satellite.
  • Capable of SBAS (WAAS, EGNOS, MSAS, GAGAN).
  • Dual 135 channels GNSS with dual-antenna input.
  • Built in independent short-circuit protection for each antenna input.
  • RTK Position Accuracy 1cm CEP.
  • Heading accuracy < 0.2° RMS.
  • Support proprietary heading and elevation.
  • Support 1/5Hz Default, Up to 10Hz update rate.
  • Industrial operating temperature range -40 to +85°C.
  • Low-power consumption and compact size.
  • USB complete driver.
  • LOCOSYS IATF 16949 Taiwan certified production sites.


  • Autonomous Vehicle Guidance
  • Unmanned Aerial Vehicles
  • Precision Agriculture
  • AGV Robotics
  • Structural / Land Monitoring
  • IPC equipment




                                   Front                                                                         Back                         


                                Helix Antenna                                                                 Survey Antenna                          


                               Mounting Base                                                      

Firebird basic function


Firebird : RTK base & rover

Easy to achieve 1cm+1PPM CEP




  • RTK Board (L1+L2) - RTK-4671-MH
    RTK Board (L1+L2)

    The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.

  • RTK 系統盒 - RTK-M200
    RTK 系統盒

    The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.

  • RTK-4P - RTK 4P
    RTK for Android system

    LOCOSYS unveiled RTK Dongle (Product name is RTK-4P) which is able to receive L1 / L2 frequency and equipped with a multi-frequency Helix antenna, The positioning accuracy specification is "cm level" which is directly connected to the Smart Phone's USB Type-C and allow the smart phone to be immediately upgraded and aimed to high-precision (RTK) applications which can be used for geographic mapping、earth-rock surveying、agricultural surveying、cadastral surveying and other purposes.