-
LS2603x-35AD
LS2603x-35AD
LS26030-35AD and LS26031-35AD series integrate GNSS fusion modules into the PCIe Full-Mini card or PCIe Half-Mini card. These GNSS DR modules can provide superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop.
-
LS2603x-52Q
LS2603x-52Q
LS26030-52Q and LS26031-52Q are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GNSS modules can provide superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU’s intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.
-
LS2603x-15R
LS2603x-15R
LS26030-15R and LS26031-15R are GNSS RTK modules incorporated into PCIe Full-Mini card and PCIe Half-Mini card, respectively. They support concurrent dual-frequency reception of GPS/QZSS, GLONASS, GALILEO and BEIDOU. They adoptadvanced 12nm process and efficient power management architecture to perform low power consumption and high sensitivity. Besides, the USB interface makes these modules easy to integrate into the laptop that requires centimeter level RTK positioning.
-
M.2-52Q
M.2-52Q
LOCOSYS M.2-52Q is a L1 High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-52Q can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-52Q builds in LOCOSYS High Precision MG-1612-52Q module. It has built-in highly integrated GNSS receiver chip. It can achieve 1.5m CEP (open-sky) positioning accuracy representing a 40% improvement over previous generations of devices. The superior cold-start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. Its superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments.
-
M.2-V2b
M.2-V2b
LOCOSYS M.2-V2b is a L1+L5 GNSS High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-V2b can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-V2b builds in LOCOSYS High Precision MC-1612-V2b module. It has built-in highly integrated GNSS receiver chip, it adopt 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity with fast TTFF. The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. The receiver’s superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high performance signal parameter search engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed. Besides, concurrent reception of L1 and L5 band signals mitigates the multipath delay and achieves sub-meter position accuracy.
-
M.2-15R
M.2-15R
LOCOSYS M.2-15R is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-15R can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-15R builds in LOCOSYS High Precision RTK-1612 module. It is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.
-
M.2-35AD
M.2-35AD
LOCOSYS M.2-35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-35R can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-35AD builds in LOCOSYS High Precision MC-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.
-
M.2-R35AD
M.2-R35AD
LOCOSYS M.2-R35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-R35AD can easily integrate into any existing system, as well as easily implemented into new systems. LOCOSYS M.2-R35AD builds in LOCOSYS High Precision RTK-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.
-
UB-52Q
UB-52Q
LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.
-
UB-V2b
UB-V2b
LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.
-
UB-15R
UB-15R
LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.
-
UB-35AD
UB-35AD
LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.
-
UB-R35AD
UB-R35AD
LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.
Press Release
-
GPS rollover issue
Dear valued customers/partners,
Read More
Please reach your sales person, distributing partners or email to info@locosystech.com for further info.
if you have any GPS rollover question/issue to LOCOSYS'... -
2019 Electronica
2019 Electronica China was held at the Shanghai New International Expo Center on March 20-22, 2019.
Read More -
ST low-end vehicle terminal solution
ST's T-BOX solution is a vehicle terminal solution designed by STMicro's automotive electronics division in order to meet the national requirement for new energy vehicle control and to meet...
Read More