-
MC-1612-DG
MC-1612-DG
LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand. ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.
-
MC-1612-DB
MC-1612-DB
LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand. ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.
-
ST-1612r-DGX
ST-1612r-DGX
LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.
-
ST-1612r-DBX
ST-1612r-DBX
LOCOSYS ST-1612r-DBx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, BEIDOU, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DBx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.
-
MC-1722-T
MC-1722-T
The MC-1722-T is a high-performance L1 and L5 dual-band, multi-frequency GNSS module that designed for timing applications. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO and QZSS to improve the availability and reliability.
-
RTK-4671-MH
RTK-4671-MH
The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.
-
RTK-4671-MHDR
RTK-4671-MHDR
LOCOSYS RTK-4671-MHDR is a high-precision RTK solution targeting for the smart driving and lane-level navigation markets. The latest designed LOCO II engine architecture is optimized to offer a seamless experience in dense urban canyons. RTK-4671-MHDR takes the shortest time to fix position and continues to work where GNSS signals are poor or not available.
-
RTK-4671-MHPD
RTK-4671-MHPD
LOCOSYS RTK-4671-MHPD is a dual-frequency, dual-antenna receiver targeting for precision agriculture, drones, and slow-moving vehicles. This receiver provides fast precise heading and RTK position. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible interfaces, smart hardware design and popular log/command formats. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MHPD meets the requirement of most location-based applications.
-
RTK-4057-MHPD
RTK-4057-MHPD
LOCOSYS RTK-4057-MHPD is a L1+L5 Dual-Frequency Position with Heading RTK Board, which targeting for precision autonomous guided vehicle, smart agriculture, unmanned aerial vehicle, and any other unmanned system to integrate in. This receiver board provides fast precise heading and RTK position. It supports global multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible USB interfaces, smart hardware design and output standard NMEA formats. Versatile, compact size, complete driver support, low power and high update rate. LOCOSYS RTK-4057-MHPD meets Windows, Linux, Raspberry Pi and Nvidia developer requirements or system integrator need, and helps you quickly realize unmanned application positioning function.
-
RTK-DUAL
RTK-DUAL
RTK-DUAL series is a dual-frequency multi-constellation RTK module that designed for applications requiring accurate dual-antenna GNSS-based heading and RTK centimeter level positioning accuracy. The dual-antenna GNSS-based heading is not subject to magnetic interference. Unlike a standard dual-frequency multi-constellation RTK Module that can only estimate heading based on the movement, RTK-DUAL provides an accurate heading even while the vehicle is stationary. It is capable of concurrently tracking all global civil navigation systems, including GPS, GLONASS, GALILEO, BEIDOU and QZSS. It acquires both L1 and L5 signals at a time while providing heading between dual antennas and RTK position. RTK-DUAL adopts 12nm process and integrates efficient power management architecture to become one of the leading groups with the lightest weight and lowest power consumption on the market. Paired with our dual-frequency low power helical antennas, it can extend the usage time of battery powered drones, robotic lawn mowers, automated logistics vehicles, etc.
Press Release
-
GPS rollover issueDear valued customers/partners,
Read More
Please reach your sales person, distributing partners or email to info@locosystech.com for further info.
if you have any GPS rollover question/issue to LOCOSYS'... -
2019 Electronica2019 Electronica China was held at the Shanghai New International Expo Center on March 20-22, 2019.
Read More -
ST low-end vehicle terminal solutionST's T-BOX solution is a vehicle terminal solution designed by STMicro's automotive electronics division in order to meet the national requirement for new energy vehicle control and to meet...
Read More