LOCOSYS is a GPS / GNSS products / modules professional manufacturers.

Agriculture

agriculture with gps
agriculture with gps

Precision Agriculture (or Site-specific Farming) is planned for the rising of the productivity. It saves the time and the cost of maintenance from traditional farming. GPS technology plays an especially crucial role in making this happen. GPS-based applications in precision farming are being used for farm planning, field mapping, soil sampling, tractor guidance, crop scouting, variable rate applications, and yield mapping, and so on. Therefore, RTK products are highly recommended for these Precision Farming businesses.

Agriculture Smart Machinery

An Agricultural Smart Machinery is using the technology of combining wireless remote monitoring and multi-constellation positioning(GNSS), it reduces the time and the cost of maintenance from traditional farming. Intelligence monitoring and in-time report allow the farmers and workers to spend their valuable time without worrying about the machines.

Smart monitoring and control

Even more, traceable data is constantly sending to your secured cloud, you are now able to monitor effectively and control the production capabilities by easy-to-use software and reliable telemetry based station.

Cost efficiency and energy friendly

LOCOSYS combo module is capable of intelligently connection and free data transmission, with Bluetooth Low Energy, you can even make a free connection to any device you truly wanted at any time without concerning heavy power drains, lowering the cost of any data transmission, makes life better and simpler.

 

LOCOSYS GPS Agriculture real case

The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the
continuity and reliability of RTK solution even in the harsh environment.

LOCOSYS RTK-4671-MHPD is a dual-frequency, dual-antenna receiver targeting for precision agriculture, drones, and slow-moving vehicles. 

Related Products
  • RTK Modules - RTK-1010
    RTK Modules
    RTK-1010

    The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.


  • RTK board (L1+L2) - RTK-4671-MH
    RTK board (L1+L2)
    RTK-4671-MH

    The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.


  • RTK board (L1+L2) - RTK-4671-MHPD
    RTK board (L1+L2)
    RTK-4671-MHPD

    LOCOSYS RTK-4671-MHPD is a dual-frequency, dual-antenna receiver targeting for precision agriculture, drones, and slow-moving vehicles. This receiver provides fast precise heading and RTK position. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible interfaces, smart hardware design and popular log/command formats. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MHPD meets the requirement of most location-based applications.


  • RTK board (L1+L2) - RTK-4671-MHDR
    RTK board (L1+L2)
    RTK-4671-MHDR

    LOCOSYS RTK-4671-MHDR is a high-precision RTK solution targeting for the smart driving and lane-level navigation markets. The latest designed LOCO II engine architecture is optimized to offer a seamless experience in dense urban canyons. RTK-4671-MHDR takes the shortest time to fix position and continues to work where GNSS signals are poor or not available.


  • RTK  System - RTK-M100
    RTK System
    RTK-M100

    RTK-M100 system product is dual-frequency multi-constellation RTK devices, Embedded NXP® i.MX 6 (Automotive Grade) high-end processor and provides centimeter-accurate GNSS measurements. All of them can work in base station or rover. There are two communication interfaces, including Ethernet, 4G/LTE. Through these built-in communication functions for local or could data center communication with the external host.


  • RTK  System - RTK-M200
    RTK System
    RTK-M200

    The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.


  • GNSS Smart Antenna Module - LS2003C-G is a complete standalone GNSS smart antenna module, including embedded patch antenna and GNSS receiver circuits.
    GNSS Smart Antenna Module
    LS2003C-G

    LS2003C-G is a complete standalone GNSS smart antenna module, including embedded patch antenna and GNSS receiver circuits. The module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO, QZSS and SBAS. It features low power and small form factor. Besides, it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment.This module supports hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction (called EASY) that is no need of both network assistance and host CPU's intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction (called EPO) that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.It is easy to install without both RF connector and coaxial cable that are needed in a separated GNSS active antenna. In other words, reduce the cost and size. Also, speed up the time to market by eliminating R&D efforts on RF matching and stability between separated GNSS antenna and module. Furthermore, it can be directly powered by a lithium battery without any external voltage regulars. Therefore, LS2003C-G of miniature size and brilliant performance is the best choice to be integrated into your slim devices.


  • GPS Smart Antenna Module - LS2003C-2RE is a complete standalone GPS smart antenna module, including embedded patch antenna and GPS receiver circuits.
    GPS Smart Antenna Module
    LS2003C-2RE

    LS2003C-2RE is a complete standalone GPS smart antenna module, including embedded patch antenna and GPS receiver circuits. The module 's functionality is using MediaTek lateast GPS, MT3337E, ROM chip and it can acquire a lot of satellites at a time while providing fast time-to-first-fix and low power consumption. Besides, it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. This module supports self-generate orbit prediction, EASYTM, to achieve faster cold start and warm start. The EASYTM is no need of both network assistance and host CPU’s intervention. The prediction is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available. It is easy to install without both RF connector and coaxial cable that are needed in a separated GPS active antenna. In other words, reduce the cost and size. Also, speed up the time to market by eliminating R&D efforts on RF matching and stability between separated GPS antenna and module. Furthermore, it can be directly powered by a lithium battery without any external voltage regulators. Therefore, LS2003C-2RE of miniature size and brilliant performance is the best choice to be integrated into your slim devices.



Press Release