DR Module

The LOCOSYS ST-1612r-DGX Dead Reckoning (DR) module is the perfect solution for automotive application. / 大辰科技有限公司成立於2005年,我們提供全球導航衛星系統(GNSS),無線通信,嵌入式系統,航空電子,汽車和消 費電子等硬體和軟體的服務範圍。

Promotion Product-RTK-1612

Promotion Product-RTK-1612

The RTK-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy.

更多
Promotion Product-RTK-1010

Promotion Product-RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多

大辰科技 DR Module簡介

大辰科技有限股份公司是台灣一家擁有超過17年經驗的專業DR Module生產製造服務商. 我們成立於西元2006年, 在GPS / GNSS產業領域上, 大辰科技提供專業高品質的DR Module製造服務, 大辰科技 總是可以達成客戶各種品質要求

DR Module

ST-1612r-DGX

The LOCOSYS ST-1612r-DGX Dead Reckoning (DR) module is the perfect solution for automotive application.
The LOCOSYS ST-1612r-DGX Dead Reckoning (DR) module is the perfect solution for automotive application.

LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode.
Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

特性

  • AEC-Q100 qualified GNSS chip
  • Support GPS, GLONASS, GALILEO and QZSS
  • Capable of SBAS (WAAS, EGNOS, MSAS)
  • Fast TTFF at low signal level
  • Built-in MEMS sensor (3-axis gyroscope and 3-axis accelerometer)
  • Support MEMS raw data output (up to 100Hz)
  • No requirement for installation orientation
  • Auto detect and operate in ADR or UDR mode
  • Support odometer (wheel-tick pulse) and forward/reverse signal input
  • Support vehicle speed input from UART port
  • Support vehicle speed input from CAN Bus (ISO 15765-4)
  • Support AGPS autonomous solution
  • LOCOSYS IATF 16949 quality control
  • Small form factor 16 x 12.2 x 2.3 mm
  • SMD type, RoHS compliant

規格

  • Satellite System: GPS + GLONASS + GALILEO + QZSS
  • Interface: UART / CAN BUS / USB
  • Input Voltage: 3.0V - 4.3V
  • Power (mA): TBD
  • VB (uA): TBD
  • Operating Temp (°C): -40 ~ 85
  • Dimension (mm): 16 x 12.2 x 2.3 mm

應用

  • Automotive Navigation.
  • M2M.
  • Track patrol and examine car.

                   

資料下載


新聞稿