大辰科技有限股份公司

大辰科技 - GNSS + GPS系統整合方案供應商

Promotion Product-RTK-1612

Promotion Product-RTK-1612

The RTK-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy.

更多
Promotion Product-RTK-1010

Promotion Product-RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多

大辰科技簡介

大辰科技有限股份公司是台灣專業GPS / GNSS產業製造商. 大辰科技自西元2006年起開始提供專業的全球衛星定位系統, 全球導航衛星系統, 慣性導航, 模組, 追蹤器, 手持GPS...等服務. 擁有超過17年的專業經驗, 大辰科技總是可以達成客戶各項品質要求.

結果 73 - 96 的 137
圖片 名稱 設定
DR Module
DR Module

LOCOSYS MG-1612AD-DR is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3 axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function. In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, MG-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

更多
DR Module
DR Module

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand. ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.

更多
DR Module
DR Module

LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand. ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance. UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612-DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above. MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.

更多
ST-1612i-DBX GNSS 模組
ST-1612i-DBX GNSS 模組

大辰科技 ST-1612i-DBX 慣性導航模組是應用於汽車的完美解決方案。 ST-1612i-DBX模組嵌入了3D 加速度器及3D 陀螺儀傳感器(MEMS), 並裝載慣導(DR)軟件, 且由意法半導體Teseo III 提供技術支持。在衛星接收不良的條件下,如城市商業區、叢林、高架橋下、隧道或地下停車場中,提高了定位準確度, 且裝載慣導(DR)軟件彌補了信號缺失時的軌跡。 同時也支持三維慣導(DR)功能。該組合導航模塊可以同時獲取和跟踪包括 GPS、 北斗、 伽利略和 QZSS 在內的多個衛星。該產品具有靈敏度高、功耗低、外形尺寸小及可靠性等特點, 為用戶提供了優越的性能。ST-1612i-DBX慣性導航模組使用符合AEC-Q100標準的GNSS芯片,並在ISO / TS 16949認證和 ISO16750標準下製造。 製造過程按照規定執行。 ST-1612i-DBX模組進一步簡化安裝自動配置車位移量的數位式速度資訊(wheel tick)或速度以及車載天線的補償。

更多
ST-1612i-DGX GNSS 模組
ST-1612i-DGX GNSS 模組

大辰科技 ST-1612i-DGX 組合導航模塊是應用於汽車的完美解決方案。 ST-1612i-DGX嵌入了3D 加速度器及3D 陀螺儀傳感器(MEMS), 並裝載慣導(DR)軟件, 且由意法半導體Teseo III 提供技術支持。在衛星接收不良的條件下,如城市商業區、叢林、高架橋下、隧道或地下停車場中,提高了定位準確度, 且裝載慣導(DR)軟件彌補了信號缺失時的軌跡。 同時也支持三維慣導(DR)功能。該組合導航模塊可以同時獲取和跟踪包括 GPS、 GLONASS、 伽利略和 QZSS 在內的多個衛星。該產品具有靈敏度高、功耗低、外形尺寸小及可靠性等特點, 為用戶提供了優越的性能。 ST-1612i-DGX慣性導航模組使用符合AEC-Q100標準的GNSS芯片,並在ISO / TS 16949認證和 ISO16750標準下製造。 製造過程按照規定執行。 ST-1612i-DGX模組進一步簡化安裝自動配置車位移量的數位式速度資訊(wheel tick)或速度以及車載天線的補償。

更多
ST-1612A-DBX GNSS 模組
ST-1612A-DBX GNSS 模組

The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A-DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

更多
ST-1612A-DGX GNSS 模組
ST-1612A-DGX GNSS 模組

The LOCOSYS ST-1612A-DGX Dead Reckoning (DR) module is the perfect solution for automotive application. The ST-1612A-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A-DGX automotive grade module adheres to automotive industry standard quality specifications and production flow. ST-1612x-DGX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

更多
DR Module
DR Module

LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

更多
DR Module
DR Module

LOCOSYS ST-1612r-DBx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, BEIDOU, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle’s altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (i.e. E-Call) for help based on the vehicle’s altitude. No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DBx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

更多
Smart Tracker Box
Smart Tracker Box

The LOCOSYS G310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DGU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS G310 can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. And through the BLE module, the LOCOSYS G310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of G310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS G310 can be linked with Google map for real-time navigation functions.

更多
Smart Tracker Box
Smart Tracker Box

LOCOSYS G310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DG GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 5.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, G310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.

更多
Smart Tracker Box
Smart Tracker Box

The LOCOSYS B310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DBU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS B310 can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU, GALILEO and QZSS. And through the BLE module, the LOCOSYS B310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of B310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS B310 can be linked with Google map for real-time navigation functions.

更多
Smart Tracker Box
Smart Tracker Box

LOCOSYS B310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DB GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 5.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, B310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.

更多
Timing Module
Timing Module

The MC-1722-T is a high-performance L1 and L5 dual-band, multi-frequency GNSS module that designed for timing applications. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO and QZSS to improve the availability and reliability.

更多
Timing Module
Timing Module

LOCOSYS ST-1612i-GT modules can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. ST-1612i-GT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode. Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.

更多
Timing Module
Timing Module

LOCOSYS ST-1612i-BT modules can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU/GLONASS, GALILEO and QZSS. ST-1612i-BT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode. Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.

更多
GW-60 GPS 手錶
GW-60 GPS 手錶

GW-60是所有衝浪者的可靠合作夥伴。 "SPEED GENIE" 記錄速度和位置之間的變化,並結合GPS多普勒檢測路線。 快速按鈕操作允許衝浪者立即控制狀態。

更多
GW-31 GPS 手錶
GW-31 GPS 手錶

一個經濟實惠的GPS手錶發現更多的戶外活動:遠足、背包、野營,找到起點。 自動GPS時間同步和日常穿戴使您的生活更有趣!

更多
GPS Walker
GPS Walker

GPS Walker is a super-sized memory GPS data logger with geo-tagging function for outdoor activities. MP3/FM player is an extra free feature. Large capacity of flash-memory logs continuous 2 million waypoints. The more attractive function is the point to point navigation. You could mark and go or track back for any interesting spots. Without mentioning that easy-to-use design makes this product more excellent. The GPS Walker, GPS data logger with MP3/FM player, will be a best choice absolutely.

更多
Genie GT-31/BGT-31 手持裝置
Genie GT-31/BGT-31 手持裝置

GT-31是一款精美緊湊的名片尺寸導航儀,精心設計,體現人體工學原理。它將舒適地適合你的手掌,安裝在自行車或摩托車的把手上,甚至可以戴在你的手臂上。時尚的單位可以作為一個時髦的小工具站在桌子上,或者更有用的可以放在汽車的儀表板上。 GT-31可以在省電模式下運行長達46小時,內置鋰離子聚合物可充電電池背光熄滅。連接到汽車點煙器,電源插座或PC /筆記本電腦時,可以充電。當旅行中沒有汽車或電源可用時,您可以購買AA電池適配器或充電電池(太陽能充電器)來延長使用。 最先進的拇指棍(TS)允許簡單的單手操作。這種堅固的導航儀防水IPX7標準,或在 水中浸入30分鐘,深度為1米,並漂浮! GT-31不僅用於處理戶外活動,還可以處理用戶定義的各種專業用途,如速度,危險區域,區域警報,高度或其他警報。為了存儲更長行程的旅行數據,有一個SD / MMC插槽用於額外的數據存儲容量。並且,它可以 通過連接到您的PC /筆記本電腦作為實時GPS 接收器使用。

更多
GW-52 GPS 手持裝置
GW-52 GPS 手持裝置

GW-52是使用GPS多普勒測量速度的GPS儀器。 十年來,LOCOSYS GPS單元已經並繼續成為全球Speed Sailing Events推薦的唯一GPS! 這包括GT11和GT31型號。 但是,這些不再可用。 GW52 GPS是GT11和GT31的替代品。經過全球領先的風帆衝浪組織的廣泛現場測試後,GW52是最優質和最精確的手持GPS。 來自GW52的文件將被美國,歐洲和澳大利亞領先的GPS Speed Sailing Sites接受。

更多
RTK Modules
RTK Modules

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多
RTK Modules
RTK Modules

RTK-1010-SB is a high-performance single-frequency GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrates efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS/QZSS, GLONASS, GALILEO, BEIDOU and NAVIC to improve the availability and reliability of RTK solution even in the harsh environment.

更多
RTK Modules
RTK Modules

The RTK-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多

結果 73 - 96 的 137

新聞稿