RTK Board (L1+L2)

RTK-4671-MHPD / 大辰科技有限公司成立于2005年,我们提供全球导航卫星系统(GNSS),无线通信,嵌入式系统,航空电子,汽车和消费电子等硬体和软体的服务范围。

Promotion Product-MC-1612-DG

Promotion Product-MC-1612-DG

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.

更多
Promotion Product-RTK-1010

Promotion Product-RTK-1010

The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

更多

大辰科技RTK Board (L1+L2)简介

大辰科技有限股份公司是台湾一家拥有超过11年经验的专业RTK Board (L1+L2)生产制造服务商. 我们成立于西元2006年, 在GPS / GNSS产业领域上, 大辰科技提供专业高品质的RTK Board (L1+L2)制造服务, 大辰科技总是可以达成客户各种品质要求

RTK Board (L1+L2)

RTK-4671-MHPD

RTK-4671-MHPD
RTK-4671-MHPD

LOCOSYS RTK-4671-MHPD is a dual-frequency, dual-antenna receiver targeting for precision agriculture, drones, and slow-moving vehicles. This receiver provides fast precise heading and RTK position. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of precise heading and RTK position even in the harsh environment. Besides, it features powerful compatibility with other GNSS receivers in the market by flexible interfaces, smart hardware design and popular log/command formats.
Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MHPD meets the requirement of most location-based applications.

特性

  • Dual-frequency and multi-constellation heading and RTK positioning solution
  • Dual 64 channels GNSS with dual-antenna input
  • Built in independent short-circuit protection for each antenna input
  • Heading accuracy < 0.2° RMS
  • Support proprietary heading and elevation
  • Up to 5 Hz update rate
  • Industrial operating temperature range -40 to +85°C
  • Low-power consumption and compact size
  • Easy and simply to integrate
  • LOCOSYS IATF 16949 certified production sites.

应用

  • Autonomous Vehicle Guidance
  • Unmanned Aerial Vehicles
  • Precision Agriculture
  • AGV Robotics
  • V2X / ETC / 5G Station
  • Structural / Land Monitoring
  • Offshore / Marine Application

                     




Software Interface



LOCOSYS Success Stories


Green Point Track: RTK

Blue Point Track: GNSS

Location: Shenzhen City, Guangdong Province, China

资料下载

关联产品
  • RTK Board (L1+L2) - RTK-4671-MH
    RTK Board (L1+L2)
    RTK-4671-MH

    The dual-frequency RTK-4671-MH receiver is a compact, cost-effective and high-precision GNSS RTK board designed for applications requiring centimeter level positioning accuracy. It supports multiple constellations, including GPS, GLONASS, BeiDou, GALILEO, QZSS and SBAS to improve the continuity and reliability of RTK solution even in the harsh environment. This board can be setup either in rover mode or in base station mode. Versatile, compact, smart, low power and high update rate, LOCOSYS RTK-4671-MH meets the requirement of most location-based applications.


  • RTK 系统盒 - RTK-M200
    RTK 系统盒
    RTK-M200

    The RTK-M200 is the category solution in the LOCOSYS RTK (Real Time Kinematics) product family. The RTK-M200 act as a reference station in a RTK setup. The system combine the centimeter level RTM dual band (L1+L5) GNSS module and 4G LTE modem module. A Mobile RTK correction signal is transmitted via cellular network. This provides repeatable accuracy even in hilly terrain or in scattered fields.


  • RTK-4P - RTK 4P
    RTK-4P
    RTK for Android system

    LOCOSYS unveiled RTK Dongle (Product name is RTK-4P) which is able to receive L1 / L2 frequency and equipped with a multi-frequency Helix antenna, The positioning accuracy specification is "cm level" which is directly connected to the Smart Phone's USB Type-C and allow the smart phone to be immediately upgraded and aimed to high-precision (RTK) applications which can be used for geographic mapping、earth-rock surveying、agricultural surveying、cadastral surveying and other purposes.




新闻稿