DR Module

MC-1612-DG

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.
 
ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.
 
UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.
 
 
MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning
 
MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.

即时服务(Mon-Fri Online: 9:00-12:00,13:00-17:00 (GMT +08))

特性

• Support GPS, GLONASS, GALILEO and QZSS L1
• Built-in LOCOSYS Dead Reckoning (ADR/UDR) both technology software
• Built-in MEMS sensor (3-axis Gyroscope and 3-axis Accelerometer)
• Support MEMS raw data output, High update rate (up to 100Hz)
• Support Odometer (wheel-tick pulse) input
• Support sensors data feed through the UART port
• Support ADR/UDR Automatic fast learning calibration
• Low-power consumption and compact size
• Fast TTFF at low signal level
• Built-in pressure sensor (option)
• Automatic configuration of wheel tick/speed input
• Small form factor 16 x 12.2 x 2.4 mm
• SMD type, RoHS compliant
• LOCOSYS IATF 16949 quality control

规格

• Satellite System: GPS + (GLONASS, GALILEO), or BEIDOU, and QZSS
• Interface: UART / CAN BUS / USB
• Input Voltage: 3.0V - 4.3V
• Power (mA): TBD
• VB (uA): TBD
• Operating Temp (°C): -40 ~ 85
• Dimension (mm): 16 x 12.2 x 2.4 mm

应用

• Autonomous Vehicle (AVN/T-BOX/HUD)
• Internet of Vehicles
• Precision Agriculture
• AGV Robotics
• V2V / V2X Station
• Structural / Land Monitoring
• Offshore / Marine Applications

点击型号名称以获取更多信息

资料下载

• 

  MC-1612-DG_datasheet_v0.86

  ---

  Datasheet of MC-1612-DG

  ---

---

关联产品

• 

  DR Module

  MC-1612-DB

  ---

  LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter , and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand.   ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.   UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.   MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning   MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.

  ---

• 

  ST-1612i-DBX GNSS 模组

  ST-1612i-DBX

  ---

  大辰科技ST-1612i-DBX 惯性导航模组是应用于汽车的完美解决方案。 ST-1612i-DBX模组嵌入了3D 加速度器及3D 陀螺仪传感器(MEMS), 并装载惯导(DR)软件, 且由意法半导体Teseo III 提供技术支持。在卫星接收不良的条件下，如城市商业区、丛林、高架桥下、隧道或地下停车场中,提高了定位准确度, 且装载惯导(DR)软件弥补了信号缺失时的轨迹。 同时也支持三维惯导(DR)功能。该组合导航模块可以同时获取和跟踪包括GPS、 北斗、 伽利略和QZSS 在内的多个卫星。该产品具有灵敏度高、功耗低、外形尺寸小及可靠性等特点, 为用户提供了优越的性能。 ST-1612i-DBX惯性导航模组使用符合AEC-Q100标准的GNSS芯片，并在ISO / TS 16949认证和ISO16750标准下制造。制造过程按照规定执行。 ST-1612i-DBX模组进一步简化安装自动配置车位移量的数位式速度资讯(wheel tick)或速度以及车载天线的补偿。

  ---

• 

  ST-1612i-DGX GNSS 模组

  ST-1612i-DGX

  ---

  大辰科技ST-1612i-DGX 组合导航模块是应用于汽车的完美解决方案。 ST-1612i-DGX嵌入了3D 加速度器及3D 陀螺仪传感器(MEMS), 并装载惯导(DR)软件, 且由意法半导体Teseo III 提供技术支持。在卫星接收不良的条件下，如城市商业区、丛林、高架桥下、隧道或地下停车场中,提高了定位准确度, 且装载惯导(DR)软件弥补了信号缺失时的轨迹。 同时也支持三维惯导(DR)功能。该组合导航模块可以同时获取和跟踪包括GPS、 GLONASS、 伽利略和QZSS 在内的多个卫星。该产品具有灵敏度高、功耗低、外形尺寸小及可靠性等特点, 为用户提供了优越的性能。 ST-1612i-DGX惯性导航模组使用符合AEC-Q100标准的GNSS芯片，并在ISO / TS 16949认证和ISO16750标准下制造。制造过程按照规定执行。 ST-1612i-DGX模组进一步简化安装自动配置车位移量的数位式速度资讯(wheel tick)或速度以及车载天线的补偿。

  ---

• 

  ST-1612A-DGX GNSS 模组

  ST-1612A-DGX

  ---

  The LOCOSYS ST-1612A-DGX Dead Reckoning (DR) module is the perfect solution for automotive application.   The ST-1612A-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.   It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DGX automotive grade module adheres to automotive industry standard quality specifications and production flow. ST-1612x-DGX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

  ---

• 

  ST-1612A-DBX GNSS 模组

  ST-1612A-DBX

  ---

  The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application.   The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.   It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

  ---

---