L1+ L5 接收器

LC2303x-Vx

---

LC2303x-Vx series products are high-performance dual-band GNSS receivers (also known as GNSS mouse) that are capable of tracking all global civil navigation systems (GPS, GLONASS, BDS, GALILEO, QZSS and IRNSS). The GNSS mouse will acquire both L1 and L5 signals at a time while providing the better position accuracy. It can provide user with fast Time-To-First-Fix, superior sensitivity and low power consumption. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications.

---

L1+ L5 DR Receiver

LU2303x-35AD

---

LU2303x-35AD series products are high-performance dual-band GNSS UDR (Untethered Dead Reckoning) receivers (also known as GNSS mouse) that are capable of tracking all global civil navigation systems (GPS, GLONASS, BDS, GALILEO, QZSS). The GNSS mouse will acquire both L1 and L5 signals at a time while providing the better position accuracy. It can provide user with fast Time-To-First-Fix, superior sensitivity and low power consumption. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications.

---

DR Module

MG-1612AD-DR

---

LOCOSYS MG-1612AD-DR is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3 axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function.   In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, MG-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.

---

DR Module

MC-1612-DG

---

LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.   ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.   UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.     MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning   MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.

---

DR Module

MC-1612-DB

---

LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter , and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand.   ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.   UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.   MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning   MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.

---

ST-1612i-DBX GNSS 模组

ST-1612i-DBX

---

大辰科技ST-1612i-DBX 惯性导航模组是应用于汽车的完美解决方案。 ST-1612i-DBX模组嵌入了3D 加速度器及3D 陀螺仪传感器(MEMS), 并装载惯导(DR)软件, 且由意法半导体Teseo III 提供技术支持。在卫星接收不良的条件下，如城市商业区、丛林、高架桥下、隧道或地下停车场中,提高了定位准确度, 且装载惯导(DR)软件弥补了信号缺失时的轨迹。 同时也支持三维惯导(DR)功能。该组合导航模块可以同时获取和跟踪包括GPS、 北斗、 伽利略和QZSS 在内的多个卫星。该产品具有灵敏度高、功耗低、外形尺寸小及可靠性等特点, 为用户提供了优越的性能。 ST-1612i-DBX惯性导航模组使用符合AEC-Q100标准的GNSS芯片，并在ISO / TS 16949认证和ISO16750标准下制造。制造过程按照规定执行。 ST-1612i-DBX模组进一步简化安装自动配置车位移量的数位式速度资讯(wheel tick)或速度以及车载天线的补偿。

---

ST-1612i-DGX GNSS 模组

ST-1612i-DGX

---

大辰科技ST-1612i-DGX 组合导航模块是应用于汽车的完美解决方案。 ST-1612i-DGX嵌入了3D 加速度器及3D 陀螺仪传感器(MEMS), 并装载惯导(DR)软件, 且由意法半导体Teseo III 提供技术支持。在卫星接收不良的条件下，如城市商业区、丛林、高架桥下、隧道或地下停车场中,提高了定位准确度, 且装载惯导(DR)软件弥补了信号缺失时的轨迹。 同时也支持三维惯导(DR)功能。该组合导航模块可以同时获取和跟踪包括GPS、 GLONASS、 伽利略和QZSS 在内的多个卫星。该产品具有灵敏度高、功耗低、外形尺寸小及可靠性等特点, 为用户提供了优越的性能。 ST-1612i-DGX惯性导航模组使用符合AEC-Q100标准的GNSS芯片，并在ISO / TS 16949认证和ISO16750标准下制造。制造过程按照规定执行。 ST-1612i-DGX模组进一步简化安装自动配置车位移量的数位式速度资讯(wheel tick)或速度以及车载天线的补偿。

---

ST-1612A-DBX GNSS 模组

ST-1612A-DBX

---

The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application.   The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.   It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

---

ST-1612A-DGX GNSS 模组

ST-1612A-DGX

---

The LOCOSYS ST-1612A-DGX Dead Reckoning (DR) module is the perfect solution for automotive application.   The ST-1612A-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.   It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DGX automotive grade module adheres to automotive industry standard quality specifications and production flow. ST-1612x-DGX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.

---

DR Module

ST-1612r-DGX

---

LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle's altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (ie E-Call) for help based on the vehicle's altitude . No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

---

DR Module

ST-1612r-DBX

---

LOCOSYS ST-1612r-DBx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, BEIDOU, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode. Both raw data of the inertial sensors and vehicle's altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (ie E-Call) for help based on the vehicle's altitude . No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DBx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.

---

RTK 系统盒

RTK-M100

---

LS2603x-15R

LS2603x-15R

---

LS26030-15R and LS26031-15R are GNSS RTK modules incorporated into PCIe Full-Mini card and PCIe Half-Mini card, respectively. They support concurrent dual-frequency reception of GPS/QZSS, GLONASS, GALILEO and BEIDOU. They adoptadvanced 12nm process and efficient power management architecture to perform low power consumption and high sensitivity. Besides, the USB interface makes these modules easy to integrate into the laptop that requires centimeter level RTK positioning.

---

LS2603x

LS2603x

---

LOCOSYS LS26030 and LS26031 are GPS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GPS module is using MediaTek All-in-One GPS chip, MT3339, and it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU's intervention. This is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

---

LS2603x-2RE

LS2603x-2RE

---

LOCOSYS LS26030-2RE and LS26031-2RE are GPS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. These GPS module's functionality is using MediaTek lateast GPS, MT3337E, ROM chip and it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. This module supports self-generate orbit prediction, EASYTM, to achieve faster cold start and warm start. The EASYTM is no need of both network assistance and host CPU's intervention. The prediction is valid for up to 3 days and updates automatically from time to time when GPS module is powered on and satellites are available.

---

LS2603x-B

LS2603x-B

---

LOCOSYS LS26030-B and LS26031-B are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. The GNSS module is based on MediaTek advanced new generation MT3333 GNSS chip. It can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU's intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

---

LS2603x-G

LS2603x-G

---

LOCOSYS LS26030-G and LS26031-G are GNSS modules incorporated into the PCIe Full-Mini card or PCIe Half-Mini card. The GNSS module is based on MediaTek advanced new generation MT3333 GNSS chip. It can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. Besides, the USB interface makes these modules easy to integrate into the laptop. These modules support hybrid ephemeris prediction to achieve faster cold start. One is self-generated ephemeris prediction that is no need of both network assistance and host CPU's intervention. This is valid for up to 3 days and updates automatically from time to time when GNSS module is powered on and satellites are available. The other is server-generated ephemeris prediction that gets from an internet server. This is valid for up to 14 days. Both ephemeris predictions are stored in the on-board flash memory and perform a cold start time less than 15 seconds.

---

M.2-52Q

M.2-52Q

---

LOCOSYS M.2-52Q is a L1 High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-52Q can easily integrate into any existing system, as well as easily implemented into new systems.   LOCOSYS M.2-52Q builds in LOCOSYS High Precision MG-1612-52Q module. It has built-in highly integrated GNSS receiver chip.   It can achieve 1.5m CEP (open-sky) positioning accuracy representing a 40% improvement over previous generations of devices. The superior cold-start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment. Its superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments.

---

M.2-V2b

M.2-V2b

---

LOCOSYS M.2-V2b is a L1+L5 GNSS High position receiver based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system . Supporting for Windows and Linux, the M.2-V2b can easily integrate into any existing system, as well as easily implemented into new systems.   LOCOSYS M.2-V2b builds in LOCOSYS High Precision MC-1612-V2b module. It has built-in highly integrated GNSS receiver chip, it adopt 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity with fast TTFF . The superior cold start sensitivity allows it to acquire, track, and get position fix autonomously in difficult weak signal environment.   The receiver's superior tracking sensitivity allows continuous position coverage in nearly all outdoor application environments. The high performance signal parameter search engine is capable of testing 16 million time-frequency hypotheses per second, offering superior signal acquisition and TTFF speed.   Besides, concurrent reception of L1 and L5 band signals mitigates the multipath delay and achieves sub-meter position accuracy.

---

M.2-15R

M.2-15R

---

LOCOSYS M.2-15R is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-15R can easily integrate into any existing system, as well as easily implemented into new systems.   LOCOSYS M.2-15R builds in LOCOSYS High Precision RTK-1612 module. It is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm procedure and integrate efficient power management architecture to perform low power and high sensitivity.   The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.

---

M.2-35AD

M.2-35AD

---

LOCOSYS M.2-35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-35R can easily integrate into any existing system, as well as easily implemented into new systems.   LOCOSYS M.2-35AD builds in LOCOSYS High Precision MC-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function.   In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.

---

M.2-R35AD

M.2-R35AD

---

LOCOSYS M.2-R35AD is a L1+L5 high-performance dual-band GNSS RTK module based on the very small industry standard M.2 Type B form factor. Using the USB bus, provides global positioning information, while taking up little space and power within a system. Supporting for Windows and Linux, the M.2-R35AD can easily integrate into any existing system, as well as easily implemented into new systems.   LOCOSYS M.2-R35AD builds in LOCOSYS High Precision RTK-1612AD-DR module which is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3-axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function.   In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use.

---

UB-52Q

UB-52Q

---

LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.

---

UB-V2b

UB-V2b

---

LOCOSYS UB series is a GNSS receiver based on the very small industry standard USB TypeB form factor. Using the USB interface, the USB series provides global positioning and time-stamp information, while taking up little space and power within a system. Also considering the existing support for Windows and Linux, the USB series can easily integrate into any existing system, as well as easily implemented into new systems.

---