The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity.
The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.
LU2303x-35AD series products are high-performance dual-band GNSS UDR (Untethered Dead Reckoning) receivers (also known as GNSS mouse) that are capable of tracking all global civil navigation systems (GPS, GLONASS, BDS, GALILEO, QZSS). The GNSS mouse will acquire both L1 and L5 signals at a time while providing the better position accuracy.
It can provide user with fast Time-To-First-Fix, superior sensitivity and low power consumption. Its far-reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications.
LOCOSYS MG-1612AD-DR is using an Airoha AG3335AD chip, dual-frequency multi-constellation solution GNSS with sensor fusion dead reckoning module. It not only supports GPS, GLONASS, GALILEO, BEIDOU and QZSS, but also has inertial sensors (3 axis accelerometers and 3-axis gyros) to provide untethered dead reckoning function.
In addition to DR, an inertial sensor can detect the vehicular dynamics when it is attached firmly on the vehicle. Consequently, abnormal driving behaviors and the vehicle status can be detected and the alarm status will be enabled to remind the users. No requirement of installation orientation and automatic calibration function make it easy to use. With these features, MG-1612AD-DR can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless navigation.
LOCOSYS MC-1612-DG is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, GALILEO, QZSS , but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output, fully supports various map mapping demand.
ADR mode, MC-1612-DG have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, the vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.
UDR mode, MC-1612-DG when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DG keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.
MC-1612-DG have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning
MC-1612-DG offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying MC-1612-DG, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not) saving time and efforts and boost the high positioning performance exceed your expectation.
LOCOSYS MC-1612-DB is a single-band multi-system with an ARM base processor. It not only supports GPS, GLONASS, BDS, GALILEO, QZSS, but also has a flash memory, TCXO, RTC crystal, LNA and SAW filter , and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software. The extended Kalman filter algorithm combines GNSS and MEMS sensor data with a weighting function that relies on GNSS signal quality. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. It supports three dimensional DR, Standard NMEA output including height, slope message output, fully supports various map mapping demand.
ADR mode, MC-1612-DB have high-precision positioning and dead reckoning performance, offers real-time 1.5m accuracy positioning and heading with low-power consumption. The software includes features to receive and use data from the built-in sensors along with external signals for wheel speed and Forward/Reverse direction, The vehicle signals are used to provide a high level of accuracy in the navigation solution. It features high sensitivity, low power and ultra-small form factor, and provide user the superior performance.
UDR mode, MC-1612-DB when under the environment with pool signal like tunnels, urban and under grounder also unable to gain the speed through vehicle, UDR will play the role to keep positioning by the built-in MEMS which means MC-1612 -DB keeps to perform the capacity of seamless positioning with UDR where the application at the environment above.
MC-1612-DB have both GNSS/ADR/UDR | 3-in-1 Seamless Positioning
MC-1612-DB offers the full-coverage positioning functionalities wherever the poor-signal environment or the installation position and keep to output high positioning performance for your applications might be under harsh environment. In the mean time, your design will be benefited from applying mc-1612-dg, the 3-in-1 solution so that easy to design (You can choose to have physical speed input or not)、saving time and efforts and boost the high positioning performance exceed your expectation.
The LOCOSYS ST-1612A-DBX Dead Reckoning (DR) module is the perfect solution for automotive application.
The ST-1612A-DBX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.
It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, BeiDou, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DBX automotive grade module adheres to automotive industry standard quality specifications and production flow.ST-1612x-DBX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.
The LOCOSYS ST-1612A-DGX Dead Reckoning (DR) module is the perfect solution for automotive application.
The ST-1612A-DGX is embedded 3D accelerometer, 3D gyroscope Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with DR software, and powered by STMicroelectronics Teseo III. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps.
It supports three dimensional DR. This module can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. It features high sensitivity, low power and ultra small form factor, and provide user the superior performance. The ST-1612A -DGX automotive grade module adheres to automotive industry standard quality specifications and production flow. ST-1612x-DGX modules use GNSS chips and MEMS sensors qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites.
LOCOSYS ST-1612r-DGx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, GLONASS, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode.
Both raw data of the inertial sensors and vehicle's altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (ie E-Call) for help based on the vehicle's altitude . No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DGx can reduce position errors in multipath environment and continue to work where GNSS signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.
LOCOSYS ST-1612r-DBx dead reckoning (DR) modules are the perfect solution for automotive application. They not only support GPS, BEIDOU, GALILEO and QZSS, but also have inertial sensors (3-axis accelerometers and 3-axis gyros) to provide dead reckoning. They will detect if there is an odometer connection or vehicle speed input, and then automatically operate in ADR or UDR mode.
Both raw data of the inertial sensors and vehicle's altitude including pitch, roll and heading angles are outputted for the driver behavior analysis. For example, the internet connected vehicles can automatically send emergency calls (ie E-Call) for help based on the vehicle's altitude . No requirement of installation orientation and automatic calibration function make them easy to use. With these features, ST-1612r-DBx can reduce position errors in multipath environment and continue to work where GNSS
signals are poor or not available, such as tunnels and indoor parking lots, as well as deliver seamless car navigation.
The LOCOSYS G310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DGU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS G310 can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. And through the BLE module, the LOCOSYS G310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of G310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS G310 can be linked with Google map for real-time navigation functions.
LOCOSYS G310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DG GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 5.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, G310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.
The LOCOSYS B310 product is complete standalone Dead Reckoning (DR) smart antenna system, including an embedded antenna, a ST-1612i-DBU module, a 2.4G module (non-standard Profile), and a BLE 4.0 module (GATT Profile), which designed for a broad spectrum of OEM system applications. The LOCOSYS B310 can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU, GALILEO and QZSS. And through the BLE module, the LOCOSYS B310 can be linked to various mobile phones of brands that support BLE, and can retrieve the relevant GNSS messages. The vehicle speed of B310 is from wireless transmission through a OBD II 2.4G dongle. With adverse GNSS conditions in urban canyons, tunnels, or parking garages where DR boosts the accuracy, and the software fills the gaps. And the LOCOSYS B310 can be linked with Google map for real-time navigation functions.
LOCOSYS B310-U is a BLE enabled GNSS receiver with dead reckoning function. It consists of an embedded GNSS antenna, MC-1612-DB GNSS module, 3-axis gyroscope, 3-axis accelerometer and BLE 5.0 function. It can simultaneously receive multiple satellite constellations that include GPS, GLNOASS, GALILEO and QZSS. Together with GNSS, dead reckoning and BLE, B310-U can provide the most mobile phones the seamless position and better navigation even in urban canyons, tunnels and underground parking lots.
The MC-1722-T is a high-performance L1 and L5 dual-band, multi-frequency GNSS module that designed for timing applications. The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO and QZSS to improve the availability and reliability .
LOCOSYS ST-1612i-GT modules can simultaneously acquire and track multiple satellite constellations that include GPS, GLONASS, GALILEO and QZSS. ST-1612i-GT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode.
Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.
LOCOSYS ST-1612i-BT modules can simultaneously acquire and track multiple satellite constellations that include GPS, BEIDOU/GLONASS, GALILEO and QZSS. ST-1612i-BT feature accurate PPS for timing applications. It has T-RAIM algorithm and position hold auto survey mode.
Besides, 1PPS output is available with only one visible satellite. Its precision GNSS timing is suitable for applications such as radio base stations, femtocell and smart grid.
GPS Walker is a super-sized memory GPS data logger with geo-tagging function for outdoor activities. MP3/FM player is an extra free feature.
Large capacity of flash-memory logs continuous 2 million waypoints. The more attractive function is the point to point navigation. You could mark and go or track back for any interesting spots. Without mentioning that easy-to-use design makes this product more excellent . The GPS Walker, GPS data logger with MP3/FM player, will be a best choice absolutely.
The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity.
The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.
The RTK-1612 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power management architecture to perform low power and high sensitivity.
The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solution even in the harsh environment.
ST 低端车载终端方案
2018年慕尼黑电子展
Dead Reckoning Solutions